TX 3100A New

Fresh air for everyone

TX 3100A is the new Turbovex decentralized ventilation unit that extends the range where TX 3000A up to now has been our large industrial size ventilator. The TX 3100A fully complies with the highest standards for ventilation in garages, industrial complexes, gymnasiums etc.

The ventilation unit is completely independent of piping and is installed by professionals in about half a day reducing your business´ down time. As you do not need piping, the unit only needs one roof penetration. 


The TX 3100A is developed to use 2 EC motors, which are among the most energy efficient motors in the ventilator market.

The highly efficient, revolving heatexchanger recovers the heat from the stale outlet air and transfer it to the fresh clean inlet air flow. This provides you with a comfortable as well as economic airexchange.

Automated internal dampers keep out draft when the unit is idle.

The air is filtered at the intake and outlet. The filter alarm indicates when a filter change is imminent.

Connect and control.
Connect the TX 3100A to the electronic control and take advantage of the network of your choice. Modbus, LON and Master/slave networks are available.

The inlet system takes advantage of the Coandă effect and the throw of the airflow is increased because the air "sticks" to the ceiling. 

A 360° inlet system to make for perfect distribution of the fresh clean air is fitted. This will also distribute the warm air colleceted under the ceiling, thereby making use of otherwise wasted energy.

Technical specifications:

Dimensions L x W

3393 x 1300 mm

Penetration size

870mm

Airexchange:

1400-3000 m³/h

Temperature efficiency

75 %

Filter:

F5

Weight:

200 kg

Power:

1 x 230 V/50Hz

Power output(motor):

Max. 2 x 750 Watt

Energy consumption:

1044 Watt-1,25kj/m³

Noise:

46-60 dbA

 

Control for TX 3100A: